Meyer Sound ULTRA-X40

SPECIFICATIONS

ACOUSTICAL1

COVERAGE TRANSDUCERS

AUDIO INPUT

Operating Frequency Range2 Frequency Response3 Phase Response Linear Peak SPL4

Low Frequency High Frequency

Type Maximum Common Mode Range

Input Impedance

Nominal Input Sensitivity

Type Total Output Power6 THD, IM, TIM

Cooling

Connector Automatic Voltage Selection Safety Rated Voltage Range Turn-on and Turn-off Points

53 Hz – 19.5 kHz
57 Hz – 18 kHz ± 4 dB
89 Hz – 18 kHz ±45°
132.5 dB (M-noise), 130 dB (Pink Noise), 131 dB (B-noise)

Rotatable horn: 110° x 50°

Two 8 in cone drivers; 4 Ω nominal impedance
One 3 in diaphragm compression driver connected to a rotatable horn; 8 Ω nominal impedance

Differential, electronically balanced
±15 V DC, clamped to earth for voltage transient protection

10 kΩ differential between pins 2 and 3

0 dBV (1.0 V rms) continuous is typically the onset of limiting for noise and music

3-channel, Class-D 1950 W peak <0.02%

Convection

powerCON 20 input with loop output
90–265 V AC, 50–60 Hz
100–240 V AC, 50–60 Hz
90 V AC turn-on, no turn-off; internal fuse protection above 265 V AC

0.27 A rms (115 V AC); 0.25 A rms (230 V AC); 0.29 A rms (100 V AC) 1.9 A rms (115 V AC); 1.0 A rms (230 V AC); 2.2 A rms (100 V AC)
3.1 A rms (115 V AC); 1.5 A rms (230 V AC); 3.4 A rms (100 V AC)
6.9 A rms (115 V AC); 3.4 A rms (230 V AC); 7.9 A rms (100 V AC) <20 A peak

AC POWER

CURRENT DRAW

Idle Current Maximum Long-Term Continuous Current (>10 sec) Burst Current (<1 sec)7 Maximum Instantaneous Peak Current Inrush Current